Généralités sur la plongée technique
-
dzonot
- Nawak team
- Messages : 690
- Enregistré le : 28 juin 2006, 03:00
-
Contact :
#31
Message
par dzonot » 18 janv. 2013, 16:50
Phoenix a écrit :dzonot a écrit :Boussole electronique de precision... perso j en ai jamais vu de suffisament precises pour de la carto de qualite... mais ce serait cool si cela marche!!
Manque plus qu'un échosondeur dessus, voire même un sondeur multifaisceaux et t'auras une super carto
Moi j'veux le truc comme dans le film "The Cave" qui permet de voir au travers les murs, le tout en 3D en plus....
Salut!
-
bardass
- Nawak team
- Messages : 710
- Enregistré le : 16 déc. 2010, 10:18
#32
Message
par bardass » 18 janv. 2013, 17:20
tu veux finir comme eux ?
-
dzonot
- Nawak team
- Messages : 690
- Enregistré le : 28 juin 2006, 03:00
-
Contact :
#33
Message
par dzonot » 19 janv. 2013, 04:41
Comme eux nan... avec elle...
Salut!
-
seb83
- Wingmaster
- Messages : 426
- Enregistré le : 06 nov. 2011, 11:33
#34
Message
par seb83 » 19 janv. 2013, 21:36
-
sperrone
- Long hose addicted
- Messages : 50
- Enregistré le : 19 août 2009, 13:46
- Recycleur : et non , OC
- Localisation : nice
#35
Message
par sperrone » 08 févr. 2013, 13:10
Quelqu'un à eu des infos concernant les caractéristiques? , il a l'air un poil épais non ?
-
BlupBlup
- Sachô Crevè
- Messages : 5842
- Enregistré le : 09 déc. 2005, 12:15
- Recycleur : meg
- Localisation : Pays de la bière
#36
Message
par BlupBlup » 08 févr. 2013, 13:21
sperrone a écrit :... il a l'air un poil épais non ?
Non il est epais "normal" par contre il est ni large ni haut.
seb83 a écrit :Pour la taille c'est tout petit : 56x57x24mm, ça se rapproche des dim d'un X1
...
Ghislain
Dans le fond on est pas si con, plongeons profond!
-
sperrone
- Long hose addicted
- Messages : 50
- Enregistré le : 19 août 2009, 13:46
- Recycleur : et non , OC
- Localisation : nice
#37
Message
par sperrone » 08 févr. 2013, 13:49
BlupBlup a écrit :
seb83 a écrit :Pour la taille c'est tout petit : 56x57x24mm, ça se rapproche des dim d'un X1
Ça va faire quoi comme écran 40mm de coté environs ? , un peu plus petit qu'un écran d'ostc.
Il y a déjà des infos sur les accus ou piles et la possibilité de les changer soi même ?
Me branche bien ce petit truc
-
htjura39
- Tekkie
- Messages : 10
- Enregistré le : 08 nov. 2012, 22:20
#38
Message
par htjura39 » 22 mars 2013, 18:53
Quelques infos en direct de leur page FB :
XDeep
The computers are planned to be released in late may-june. There will be three versions of the devices available: Bottom Timer, EANx computer with 3 gases switchable underwater and 16 gases TMX computer. Price for the bottom timer will be 249 eur. The computer prices will be 400-450 eur for EANx and 600-650 for TMX. BT will be upgradeable to EANx and then to TMX computer.
Tout cela est bien tentant
-
sperrone
- Long hose addicted
- Messages : 50
- Enregistré le : 19 août 2009, 13:46
- Recycleur : et non , OC
- Localisation : nice
#39
Message
par sperrone » 22 mars 2013, 19:10
vi , il y a même un compas intégré en dépannage , je pense me laisser tenté des la sortie de la version ordi.
-
TheSnake
- Wingmaster
- Messages : 334
- Enregistré le : 13 févr. 2013, 19:56
- Recycleur : Megalodon
#40
Message
par TheSnake » 23 mars 2013, 21:37
à 250€ je le prend en backup de mon Shearwater Predator.
-
papamorse
- NPSFQQA
- Messages : 4120
- Enregistré le : 02 janv. 2006, 22:30
- Recycleur : a plus, snif....
- Localisation : Nice, Alpes Maritimes,France
#42
Message
par papamorse » 27 mars 2013, 08:56
pas large mais pas mal épais non ?
Faut faire gaffe à pas l'accrocher !
-
Philippe GERIN
- Wingmaster
- Messages : 372
- Enregistré le : 04 oct. 2009, 14:19
- Recycleur : Kiss - Megalodon
- Localisation : Chartres
#43
Message
par Philippe GERIN » 27 mars 2013, 10:41
Ça me être de la même taille qu'un Aladin.
Il y a longtemps, j'ai eu un des premiers VR3: la brique ! Depuis je ne me plains plus de la taille des ordi tek ! <D
A+
Philippe
-
Pim
- Tekkie
- Messages : 3
- Enregistré le : 23 oct. 2012, 13:54
#44
Message
par Pim » 27 mars 2013, 12:49
Pour ceux que ça intéressé,
Ils m'ont envoyés les infos pour un article sur le matériel.
Voici le mail brut:
Hello,
Here's a brief information about OLED devices (pricing below).
Hardware features:
- Full color, high resolution OLED display;
- Big balanced buttons with electronic sensor (very easy to operate);
- Build in digital compass;
- Build in accelerometer with screen flip;
- Automatic screen brightness control with internal light sensor;
- USB port;
- Can be charged with any smartphone microUSB charger;
- Panasonic Li-ion battery - 20-40 hours of work, 1.5h to full load;
- Advanced power management - inform how many hours will work;
- Ultra compact size;
- Strap and bunge mount.
General software features (bottom timer):
- Multiple switchable screens - user can set the order and switch on or
switch off particular screen;
- U.VSI - very precise vertical speed indicator showing ascent/descend
speed regarding to set optimal/maximum speed for particular depth range;
- Digital compass with Guide.ME function - device automatically navigates
over the waypoints;
- 16 build in color shemes + user color scheme;
- Special alarm color codes;
- Max depth alarm, total dive time alarm, avg depth alarm, alarm clock;
- Powerfull logbook with huge memory (UDDF export);
- Very quick firmware upgrade;
And very important: upgradeable between bottom timer, to nitrox computer
or trimix computer.
Nitrox computer - general features +
- Buhlmann ZHL-16C;
- Three mixes up to 100% O2 switchable underwater;
- PPO2 alarms additionally to general alarms;
TMX computer - nitrox features +
- 16 mixes with "backup mix" option - user can set the mix as ON, BACKUP
and OFF. The mixes in ON state will be selected as the computer during the
dive. BACKUP mixes can be selected manually by user (it may be partner's
gas);
There's also a MultiDeco version planned for this year.
Pricing:
- Bottom timer: 249 eur;
- Nitrox computer: 399 eur;
- Trimix computer: 599 eur.
The bottom timer should be available in late april-may. The computers
are planned for may-june.
-
bardass
- Nawak team
- Messages : 710
- Enregistré le : 16 déc. 2010, 10:18
#45
Message
par bardass » 27 mars 2013, 13:16
Pim a écrit :
...
There's also a MultiDeco version planned for this year.
Pricing:
- Bottom timer: 249 eur;
- Nitrox computer: 399 eur;
- Trimix computer: 599 eur.
The bottom timer should be available in late april-may. The computers
are planned for may-june.
si la qualité de fabrication est présente, toutes ces infos sont canons
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré